Earth Auger FM52EA
8
STOPPING THE ENGINE
1. Bring the throttle to the idle position (C), and run it for 2~3 minutes at a
low speed until the engine cools.
2. Switch off the engine by putting the stop switch A, in the “STOP”/O
position.
3. Remove the bit,clean the machine.
Operation
WARNING:
Avoid stopping the engine suddenly when it is
running at high speed. Doing so could cause damage to the
machine.
AIR FILTER
Every 25 hours, remove the cover (K), and the filter (G). The filter should be
washed with petrol and dried before refitting it.
CARBURETTOR
Screw (H), must be adjusted so that the engine promptly responds to sharp
accelerations and gives good idle operation and gives maximum power
during the cutting phase.
Idle screw (L), is adjusted in order to ensure a good safety margin between
idle turning and clutch engagement.
Weather conditions and altitude may affect carburation.
Maintenance
L
Summary of Contents for FM52EA
Page 15: ...Earth Auger FM52EA 15 Exploded Diagram...
Page 19: ...Earth Auger FM52EA 19 Parts List...
Page 23: ...Earth Auger FM52EA 23...
