1
19
21
The internal ring is interlocking.
Start by positioning and lining up the back and sides first. Fix the back
section using 2x50mm screws at both ends screwing into the posts.
Using a rubber mallet gently tap the boards until the notches are
locked.
Use a spirit level along the length of each post to make sure the product
is still level and square.
When all of the sections are in place secure them to the posts with
2x50mm screws for each end.
Slot each of the posts into the top of corner feet. You may need to
use a rubber mallet to make sure these are in tight and flush.
Fix the top ring of fascias so that they sit on the lip of the posts
and all meet up at the ends.
Fix the boards using 2x50mm screws at each end.
b
b
x2
leve
l
2
3
b
x2