1
MGCLSPTR
MGHBPPTR
Slide the window glazing into
the recesses in the window so
that it is tight against the top.
Position two of the plastic clips
at the bottom of the glazing to
stop it from sliding out.
Secure each clip in place using
the 20mm panel pins for each.
60mm SCREW
Fix the left and right
hand side panels to the
back panel as shown
using 3x60mm screws
for each, screwing
through the back panel
frame work into the
side panel.
Place the side panels on the
floor and slot the side panel
glazing into the recess so it sits
flush.
Place the beading
(21x12x540mm) tight against
the top and bottom of the
recess. Next position the
(21x12x756mm) pieces on
either side.
Secure each beading in place
using 3 panel pins for the sides
and 2 for the top and bottom.
21120540PTR
PW6065422
21120475PTR
MGWINPTR
MGCLSPTR
Place the door on the floor and
slot the door glazing into the
recess so it sits flush.
Place the beading
(21x12x475mm) tight against
the top and bottom of the
recess. Next position the
(15x12x986mm) pieces on
either side.
Secure the 986mm beading in
place using 3 panel pins and 2
panel pins for the 475mm
beading.
PW7795402
21120756PTR
21120986PTR
MGHDRPTR
PW475100802
MUST PRE DRILL
QTY 8
QTY 6
2
PIERCE THESE
BEFORE
POSITIONING
25mm PINS
QTY40
20mm PINS
