6
Place the magnetic catch against the
inside of the door frame but opposite the
magnetic plate on the reverse of the door.
Fix this in place using 2 x 25mm screws.
E
H
Place the hinges against the door
so that they are in line with the
battens on the reverse and secure
using 3 x 25mm (black) screws.
Place the door into the door
frame and fix the other end
of the hinge using 4 x 25mm
(black) screws for each.
Issue 0414
5
6
4
Place the handle against the door, in line with the edge
of the board and positioned just below the level of the
window. On the back of the door (inside) place the
magnetic plate opposite the handle and use 2 x 25mm
screws to fix both the plate and handle to the door
screwing from inside.
K
Insert a piece of the
glazing in to the frame
and fix it in place,
pinning a glazing strip
on each side as shown.
Use 2 x panel pins for
each strip.
G
K
Attention :
When positioning the door the gap between the door and the frame on the hinged side
must be no less than 12mm. The gap on the opening side must be less than 5mm.
Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
