X 3 PER CORNER STRIP
X 3 PER BARGE BOARD
9
10
SECURE A
45151660DTR
(CORNER
STRIP) TO EACH OF THE FOUR
CORNERS WITH 3 x 30mm NAILS PER
STRIP. NAILS SHOULD BE PLACED
APPROXIMATELY AS SHOWN TO
LEFT. THE BOTTOM OF
45151660DTR
(CORNER STRIP)
SHOULD BE IN LINE WITH BOTTOM
OF CLADDING ON SIDE PANELS.
POSITION
70080730A1DTR
(BARGE BOARDS) ON BOTH ENDS OF SHED SO
THAT THE TOP EDGE OF THE
70080730A1DTR
(BARGE BOARD) IS IN LINE
WITH THE TOP EDGE OF THE ROOF AND THE POINT OF
70080730A1DTR
(BARGE BOARD) MEETS UP WITH THE HIGHEST POINT OF THE ROOF.
SECURE EACH
70080730A1DTR
(BARGE BOARD) IN PLACE WITH 3 x 30mm
NAILS PLACED AS SHOWN ABOVE. TRIM OFF ANY EXCESS FELT THAT
IS SHOWING BELOW THE BARGE BOARDS.
45151660DTR
70080730A1DTR
12
SECURE PAD BOLT TO
OUTSIDE OF
PTGVDR1672
(
DOOR) USING 6x30mm
SCREWS. THE SCREWS MUST
LOCATE INTO THE SHORT
HORIZONTAL BATTEN ON
THE INSIDE OF THE
PTGVDR1672
(DOOR).
SECURE PAD BOLT RECEIVER
TO
ABQ
46DEV2
(DOOR END)
OF SHED USING 2x 30mm
SCREWS.
DOOR
DOOR END
PAD BOLT
RECIEVER
X 6
4 FOR PAD BOLT 2 FOR RECEIVER
11
PLACE
85009
(PLASTIC “Z” STRIP) ACROSS BOTTOM OF THE WINDOW
OPENING. THE LONG FACE OF THE Z SHOULD FACE DOWN ON THE
OUTSIDE OF THE
ABQ46WSV2PTR
WINDOW SIDE. SECURE IN
PLACE WITH 3 PANEL PINS. PLACE
Pw610610
(WINDOW) INTO
WINDOW OPENING FROM INSIDE THE SHED. THE BOTTOM OF THE
Pw610610
(WINDOW) SHOULD SIT ON TOP OF THE
85009
(PLASTIC “Z”
STRIP). PLACE A
15120585PTR
(GLAZING STRIP) ALONG THE BOTTOM
OF THE
Pw610610
(WINDOW) ON THE OUTSIDE OF THE SHED AND
SECURE IN PLACE WITH 3 PANEL PINS. PLACE A
15120585PTR
(GLAZING STRIP) TO THE LEFT AND RIGHT OF THE
PW610610
(WINDOW) AND SECURE EACH IN PLACE WITH 3 PANEL PINS.
.
GLAZING STRIPS
15120585PTR
x 2
ON INTERIOR OF SHED
INTERIOR OF SHED
STYRENE WINDOW
GLAZING STRIP
15120585PTR
x 1
ON EXTERIOR OF SHED
PLASTIC Z STRIP
85009
x 1
ON EXTERIOR OF SHED
X3 FOR PLASTIC “Z” STRIP
x3 FOR EACH GLAZING STRIP
ISSUE 0113
