14
Remote side IR Extender Function:
Tx Function:
Receiving IR signal from 4 sets HDBaseT ports, send out the signal by Tx (connect
with 3.5
ψ
IR Emitter) to control source devices.
Rx Function :
Receiving IR signal from Rx (connect 3.5
ψ
IR Receiver cable) to control remote
monitors at 4 sets HDBaseT ports at the same time.
HDBaseT IR Function:
1.
Use IR01 (remote control) to control the Matrix input port switching from receiver
side. (Work with IR-CR01 IR receiver cable)
2 . Using remote control of source device or TV, to control source device or TV.
(Work with IR-CT01 IR emitter cable, IR-CR01 IR receiver cable).
HDBaseT linking cable:
Recommend to use high quality Cat.5e
、
Cat.6
、
Cat.6a UTP / STP or FTP cable.
HDBaseT transmission distance:
Transmission distances up to 100 meters, using a lower resolution won’t extend to longer
distance.
If the CAT5e/6 cable connections go through wall socket from the wall outlet to HE02R
receiver, the cable length must less 5 meters between HE02R receiver and wall socket.
The wiring diagram as below:
├
Cat.6 MAX 100M
─────────────
─────────────
┤
┌───┐
┌─────┐
┌─────┐
┌───┐
│
HE04M
│────│
Wall Jack
│──────────────│
Wall Jack
│────│
HE02R
│
MAX 5M
MAX 5M
└───┘
└─────┘
└─────┘
└
─┘