background image

 

HDMI (HDBaseT) Matrix Switcher Series 

ITEM NO.:    HE04M 4 x 4    HDMI (HDBaseT) Matrix Switcher    

 

 

With the latest and more affordable HDBaseT technology extend HDMI sources up to 100M at 
1080p or 1920x1200. HE04M HDMI 4 by 4 Matrix Switcher allows for effortless control of up to 4 
devices through IR remote control, RS-232 and the front panel. 

     

 

HE04M    4 x 4    HDMI (HDBaseT) Matrix Switcher   

 

4 x HDMI inputs , 4 x HDMI Outputs Matrix switcher 

 

Dual Output: local HDMI port or remote RJ45 termination   

 

Work with HE02ER, HE02R receiver at each monitor up to 100 meters over CAT5e/6. 

 

Work with HE02EIR receiver at each monitor up to 70 meters over CAT6a cable. 

 

Three control option: Front panel button, IR remote control, RS232 through remote PC.   

 

Support local/remote IR control to select input/output.     

 

Built in RS232 console port to select input/output. 

 

Built 1 in 4 out IR distributor function, allow the HE04M control each monitor and also 
could be using the IR remote control to select the input source from the monitor side. 

 

Uncompressed high definition video  1080p@60Hz 12 bit and 3D capable 

 

HDMI 1.4 video features supported, HDCP compliant.     

 

Built in 4 channel IR & RS232 extender (work with Receiver: HE02EIR, HE02ER,) 

 

Input/Output status could be displayed at front panel LCM & LED. 

 

 

Optional Model:   

    

RC04 : 4 x 4 Keypad remote control (select HE04M input/output) 

  

 

 

Optional CAT5E/CAT6 Receiver Model:     

HE02ER:  100m HDMI Receiver 

HE02R :      100m HDMI, IR and RS232 Receiver   
HE02EIR:    70m HDMI with IR Receiver   

                               
 

 

 

Summary of Contents for HE04M

















Reviews: