4
IMPORTANT
FOR OPTIMUM SAFETY:
• If you have a serious eye condition or any medical skin concerns, please consult a physician before use.
• Using IRIS™ 2 should be comfortable – if you experience discomfort, discontinue use immediately and consult
a physician.
• IRIS™ 2 should only be applied to the under-eye area and brow bone, and never to the eyelid or eyeball.
• For reasons of hygiene, we do not recommend sharing your IRIS™ 2 with anyone else.
• Avoid leaving your IRIS™ 2 in direct sunlight and never expose it to extreme heat or boiling water.
• Close supervision is necessary when this device is used by, on, or near children, as well as those with reduced
physical and mental abilities.
• Discontinue use if this product appears damaged in any way. This product contains no serviceable parts.
• Use this device only for its intended use as described in this manual. If you do not find the answer to your specific
question, or if you have any other questions regarding the device’s operation, please visit www.foreo.com
CLEANING YOUR IRIS
™
2
Always clean your device thoroughly after use. Wash the device with soap and warm water. Pat dry with
a lint-free cloth or towel, or leave to air dry. After use, we recommend spraying the device with FOREO’s
Silicone Cleaning Spray and rinsing with warm water for optimal results.
NOTE:
Never use cleaning products containing alcohol, petrol or acetone, as they may irritate the skin
and damage the silicone.
TROUBLESHOOTING
Precautions to be taken in the event of changes in the performance of IRIS™ 2.
If IRIS™ 2 is not activated when pressing the universal button:
• Battery is empty. Recharge using the USB charging cable for up to 2 hours until fully charged, and then restart
your IRIS™ 2 by holding down the universal button.
• Interface is locked. Unlock it by holding down + and – buttons together.
If IRIS™ 2 cannot be switched off and/or interface buttons do not respond:
• Microprocessor is temporarily malfunctioning. Connect to the USB charging cable and/or press and hold the
universal button to restart the device.
If IRIS™ 2’s indicator light does not blink when the USB charging cable is connected:
• Battery is fully charged, ready for up to 150 uses.
• Battery is drained and will require several minutes to acknowledge USB charging cable.
• USB charging cable is not properly connected. Check electrical outlet / USB socket and charging port.
If IRIS™ 2 has fallen into water and the charging port is wet:
• Dry off and continue use. IRIS™ 2 is completely waterproof and the charging port is fully sealed.
