9 421009 515752
FORENO TAPWARE (NZ) LTD | Freephone: 0508 FORENO | [email protected] | 5 Hewlett Street, Port Whangarei 0110 | FORENO.CO.NZ
O Ring
Bench/Vanity Top
(not supplied)
Basin Spacer
Back-nut
Tail-Pipe
Handle
(different for
each range)
Lip
*Mains Pressure
Valve (1 per tap)
Supply Hose
(not supplied)
EzyFlo Basin Taps
EZF2
Congratulations on your purchase of this high quality product from Foreno Tapware.
Please read the following before installation and retain (along with your receipt) for future reference.
TECHNICAL SPECIFICATIONS
Suitable for All Pressures
Minimum Pressure = 17kPa
Maximum operating Pressure = 500kPa
Maximum operating Temperature = 65 deg. Celsius
For domestic use only.
CONFIGURATION
Mains Pressure systems Insert the valve from the
mains pressure pack.
See diagram.
Unequal Low Systems Install as supplied.
Equal Low systems
Install as supplied.
INSTALLATION
For pressures exceeding 500kPa install a pressure
reducing valve. Failure to do so may void the warranty.
• Drill a minimum 25mm hole within the vanity top.
• Remove back-nut and basin spacer.
• Mount tap with O ring in base groove.
• Fit basin spacer underneath and tighten on back-nut.
• Connect to plumbing.
• Turn on water supply. Check for leaks.
