4
3
2
White/Orange and
White/Green
1
3
1
Orange and
Green
2
6
Pinpad operation
To open a door using your access card and a pincode:
Present your access card to the reader.
The LED will start blinking red/green slowly
Enter your pincode.
Door will open.
To arm the intrusion using card and pincode:
Press *
The card reader is now in arming mode. The LED will start blinking red/green quickly
Present your access card to the reader.
The LED will start blinking red/green slowly
Enter your pincode
The LED will start blinking red/green quickly. When the intrusion alarm is armed correctly
the LED starts blinking red/green slowly.
Tip
When entering your PIN code, remove your finger at least 1 cm from the panel between each
digit.
Technical data
Interface
RS485 (Polyx NF+)
Supported cards
Mifare 1K, Mifare 4K, Mifare DESFire 0.6, Mifare DESFire EV1 8k, ISO14443A
compatible
Power consumption 5-16 VDC, 0,7W average, 1,4W peak
LED consumption
12VDC, max. 1,8W
Dimensions
80mm x 80mm x 13mm (HxWxD)
