Ford transit connect 2012 User Manual Download Page 133

Page: 133 / 299

3. Clip the tether strap to the
anchor as shown.

Second-row outboard seating positions

1. Remove the head restraint. For instructions on how to remove the
head restraint, refer to

Second row adjustable head restraints

earlier

in this chapter.

Note:

Place the head restraint underneath the back of the front seat

for storage.

2. Locate the correct anchor for the selected seating position.

•

On five-passenger vehicles,
anchors are located on the
passenger-side and driver-side
upper rear door frame area close
to the roof.

•

On four-passenger vehicles the
anchor is located on the
driver-side upper rear door frame
area close to the roof.

Seating and Safety Restraints

133

2012 Transit Connect

(tst)

Owners Guide, 1st Printing
USA

(fus)

PAGE POSITION:

133

JOB:

@zeta.tweddle.com/ford_pdm/ford/own2002/835536-en-tst/og

pubnum:

Summary of Contents for transit connect 2012












































































































































































































































































































Search results

Summary of Contents for transit connect 2012

Reviews:

Ford transit connect 2012, User Manual, Page: 133 / 299

Search results

Summary of Contents for transit connect 2012

Reviews: