Ford TOURNEO CONNECT, Owner'S Manual

Page: 39 / 437

·
Ensure that your speed and driving style
are always appropriate for the current
visibility, weather and
road/traffic con-
ditions.
·
Poor visibility, darkness, snow, rain and
fog can cause traffic signs to be not dis-
played or be incorrectly displayed by
the system.
·
If the camera’s field of view is dirty, cov-
ered or damaged, the function of Traffic
Sign Recognition may be impaired.
WARNING
Driving recommendations and traffic signs
displayed by Traffic Sign Recognition may
differ from the current traffic situation.
·
Not all traffic signs can be recognised
by the system and displayed correctly.
·
Traffic signs and traffic regulations have
priority over the recommendations and
displays provided by the Traffic Sign
Recognition system.
Limits of Traffic Sign Recognition
Please refer to at the start of the
chapter on page 36.
Error messages
The system is in
the initialisation phase.
Or:
The camera has not detected any
regulatory or warning signs.
System
fault. Go to a correspondingly quali-
fied workshop.
Fault in the Traffic Sign Recognition
system speed warning. Go to a corre-
spondingly
qualified workshop.
The windscreen is dirty in the area of
the camera or the camera view is im-
paired due to the weather conditions.
Clean the windscreen
→
page 363.
No traffic signs available.
Error: Traffic Sign Recognition.
Speed warning currently not available.
Traffic Sign Recognition: please clean
windscreen.
No data transmission from the Info-
tainment system. Check that valid
map data is installed in the Infotain-
ment system.
Or:
the vehicle is located in an area that
is not covered by the map stored in
the Infotainment system.
Traffic Sign Recognition
is not supported in the country in
which you are currently travelling.
Function limitations
Traffic Sign Recognition is subject to sys-
tem-related limitations. The following con-
ditions can limit the function of the
Traffic
Sign Recognition system, or prevent it from
working altogether:
— Poor visibility, for example when it
snows.
— When dazzled, e.g. by oncoming traffic or
sunlight.
— High speeds.
— Covered or dirty camera.
—
Traffic signs that are located outside of
the camera’s field of view.
— Partially or fully hidden traffic signs,
e.g. by trees, snow, dirt or other vehicles.
— Traffic signs that do not correspond to
the standard design.
— Damaged or bent traffic signs.
— Variable traffic signs on gantries
(changeable traffic sign display using
LEDs or other light sources).
— Out-of-date map material of the Info-
tainment system.
— Vehicles that have traffic sign stickers,
e.g. speed restrictions on trucks.
Using Traffic Sign Recognition
Please refer to at the start of the
chapter on page 36.
Speed warning function
If Traffic Sign Recognition detects that an
applicable speed limit has been exceeded,
Traffic Sign Recognition is currently re-
stricted.
No data available.
Traffic Sign Recognition 37
2KF012
720AB