Ford TOURNEO CONNECT Page 168 Owner'S Manual Download

Page: 168 / 437

Adjusting Adaptive Cruise Con-
trol

Please refer to at the start of the

chapter on page 161.

Adjusting the distance

Fig. 115

On the display of the analogue in-

strument cluster: set distance

, Adaptive

Cruise Control is controlling the vehicle (illus-
tration).

Fig. 116

On the display of the digital instru-

ment cluster: set distance

, Adaptive Cruise

Control is controlling the vehicle (illustration).

You can set the distance in

five

steps from

very small to very large:
1. Press the button.
2. Press the or button.

Or:

press the button repeatedly until

the required distance is set.
The instrument cluster display shows
the chosen distance setting

→

Fig. 115

→

Fig. 116

. Note the

country-specific

regulations regarding

the minimum distance.

In the Assist systems menu of the Infotain-

ment system, you can choose whether you

want to start control with the distance set

at the end of the trip or a preselected dis-
tance.
If Adaptive Cruise Control is not active, the

selected distance and the vehicle are not

highlighted in the instrument cluster.

Adjusting the speed

Using the buttons on the multifunction
steering wheel, you can adjust the stored
speed within the

specified

speed range as

follows:

Press the

button on-

ly when Adaptive Cruise Control is ac-

tive.

Press the

button on-

ly when Adaptive Cruise Control is ac-

tive.

Press the button.

Pressing it for the

first

time switches

to the next highest 10 km/h or 5 mph
interval:

Press the button.

Pressing it for the

first

time switches

to the next lowest 10 km/h or 5 mph
interval:

Press and hold the or button to contin-

uously change the stored speed.

WARNING

If you do not maintain the minimum dis-
tance to a vehicle in front or if the

differ-

ence

in speed between the vehicle in front

and your own vehicle is so great that the
braking action of the Adaptive Cruise
Control is

insufficient,

you are in danger of

colliding with the vehicle in front. Rain and
winter conditions will also reduce the

braking distance.

Adaptive Cruise Control may not be
able to detect all driving situations cor-
rectly.

Always be prepared to brake the vehi-
cle yourself.

Depressing the accelerator will override
the Adaptive Cruise Control. Adaptive

+ 1 km/h

(1 mph)

- 1 km/h

(1 mph)

+ 10 km/h

(5 mph)

- 10 km/h

(5 mph)

166

Driver assist systems

Summary of Contents for TOURNEO CONNECT






















































































































































































































































































































































































































































Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands

Ford TOURNEO CONNECT, Owner'S Manual

Search results

Summary of Contents for TOURNEO CONNECT

Reviews:

Related manuals for TOURNEO CONNECT

Brands by name

Popular brands