Note:
The lug nuts of alloy wheels can also
be used for the steel spare wheel for a short
time (maximum two weeks).
Note:
Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note:
Make sure that the cones on the lug
nuts are against the wheel.
1.
Install the wheel.
2. Install the lug nuts finger tight.
3. Install the locking lug nut key.
4. Partially tighten the lug nuts in the
sequence shown.
5. Lower your vehicle and remove the
jack.
6. Fully tighten the lug nuts in the
sequence shown. See
Technical
Specifications
(page 197).
7.
Install the wheel trim using the ball of
your hand.
WARNING
Have the lug nuts checked for
tightness and the tire pressure
checked as soon as possible.
Stowing the Flat Tire
Do not raise the spare wheel carrier
without the wheel attached. Damage can
occur to the winch mechanism if lowered
without a wheel attached.
Note:
Do not lay alloy wheels face down
on the ground, this will damage the paint.
When stowing the flat tire use a sheet or
mat under the wheel to protect the paint.
TECHNICAL SPECIFICATIONS - SHORT WHEELBASE
Lug Nut Torque
lb.ft (Nm)
Wheel type
100 lb.ft (135 Nm)
All
197
Tourneo Connect (CHC) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, Long Wheelbase Kombi/Short Wheelbase Kombi, Base/Base High Payload/Titanium/Titanium High Payload/Trend/Trend ECOlite/Trend High Payload, CG3588en enGBR, Edition date: 02/2014, None
Wheels and Tires