Ford Tourneo Connect 2002, Owner'S Manual, Page: 15 / 2797

Paints
See also Solvents, Chemical Materials.
Highly flammable, flammable - observe No Smoking policy
One Pack
Can contain harmful or toxic pigments, driers and other components as well as solvents.
Spraying should be carried out only with adequate ventilation.
Two Pack
Can also contain harmful and toxic unreacted resins and resin hardening agents. The
manufacturers instructions should be followed. See also Resin-based Adhesives and
Isocyanate Adhesives and Sealers under Adhesives and Sealers.
Spraying should preferably be carried out in exhausted ventilated booths removing vapor
and spray mists from the breathing zone. Individuals working in booths should wear
appropriate respiratory protection. Those doing small-scale repair work in the open
workshop should wear air-fed respirators.
Pressurized Equipment
See High Pressure Air, Lubrication and Oil Test Equipment.
Solder
Solders are mixtures of metals such that the melting point of the mixture is below that of
the constituent metals (normally lead and tin). Solder application does not normally give
rise to toxic lead fumes, provided a gas/air flame is used. Oxy-acetylene flames should not
be used, as they are much hotter and will cause lead fumes to be produced.
Some fumes may be produced by the application of any flame to surfaces coated with
grease, and inhalation of these should be avoided.
Removal of excess solder should be undertaken with care, to make sure that fine lead dust
is not produced, which can give toxic effects if inhaled. Respiratory protection may be
necessary.
Solder spillage and filings should be collected and removed promptly to prevent general air
contamination by lead.
High standards of personal hygiene are necessary in order to avoid ingestion of lead or
inhalation of solder dust from clothing.
Solvents
See also Chemical Materials, Fuels (Kerosene), Fire.
For example acetone, white spirit, toluene, xylene, trichloroethane.
Used in cleaning and dewaxing materials, paints, plastics, resins and thinners.
Some may be highly flammable or flammable.
Skin contact will degrease the skin and may result in irritation and dermatitis following
repeated or prolonged contact. Some can be absorbed through the skin in toxic or harmful
quantities.
Splashes in the eye may cause severe irritation and could lead to loss of vision.
Brief exposure of high concentrations of vapors or mists will cause eye and throat irritation,
drowsiness, dizziness, headaches and, in the worst circumstances, unconsciousness.
Repeated or prolonged exposure to excessive but lower concentrations of vapors or mists,
for which there might not be adequate warning indications, can cause more serious toxic or
harmful effects.
Стр . 12 из 16
05.02.2013 http://127.0.0.1:8888/wsm/js/procedure.do?variantId=941&proc-uid=G17372&guid=...
http://vnx.su