Ford Taurus 2010 Page 254 Owner'S Manual Download

Page: 254 / 388

During ESC events the stability control light in the instrument cluster
will flash.

Certain adverse driving maneuvers may activate the ESC system, which
include but are not limited to:

•

Taking a turn too fast

•

Maneuvering quickly to avoid an accident, pedestrian or obstacle

•

Driving over a patch of ice or other slippery surfaces

•

Changing lanes on a snow-rutted road

•

Entering a snow-free road from a snow-covered side street, or vice
versa

•

Entering a paved road from a gravel road, or vice versa

•

Cornering while towing a heavily loaded trailer (refer to

Trailer

towing

in the

Tires, Wheels and Loading

chapter).

Switching off AdvanceTrac

威

If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off certain features of the AdvanceTrac

威

system may be

beneficial because the wheels are allowed to spin. This will restore full
engine power and will enhance momentum through the obstacle.

To switch off the AdvanceTrac

威

system, press the stability control

switch. Full features of the AdvanceTrac

威

system can be restored by

pressing the stability control switch again, or by turning off and
restarting the engine.

When the AdvanceTrac

威

system is

off, the stability control off light will
illuminate steadily. Pressing the
AdvanceTrac

威

control switch again

will turn off the stability control
light.

In R (Reverse), ABS and the engine traction control and brake traction
control features will continue to function; however, ESC is disabled.

OFF

Driving

254

2010 Taurus

(500)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for Taurus 2010





































































































































































































































































































































































































Search results

Summary of Contents for Taurus 2010

Reviews:

Related manuals for Taurus 2010

Brands by name

Popular brands

Ford Taurus 2010, Owner'S Manual

Search results

Summary of Contents for Taurus 2010

Reviews:

Related manuals for Taurus 2010

Brands by name

Popular brands