All Other Vehicles
NOTE:
If your vehicle is equipped with Integrated Keyhead Transmitters IKTs, you do not need all the IKTs to
program the RF keypad to your vehicle.
9.
Make sure that you have all of the Fobs and RF keypads for this vehicle.
10.
Unlock your vehicle electronically with the Fob or door unlock button.
11. Put a key in the ignition.
12. Turn the key from the OFF position to RUN (not START) position eight times within 10 seconds
with the eighth turn ending in the RUN position. The doors will lock, and then unlock, to confirm
the vehicle is in programming mode.
13. Within 20 seconds of completing the previous step, press any button on Fob 1, if equipped.
The doors will lock, and then unlock, to confirm that the Fob has been programmed.
14. Within 20 seconds of completing the previous step, press any button on Fob 2, if equipped.
The doors will lock, and then unlock, to confirm that the Fob has been programmed
15. Within 20 seconds of completing the previous step, press the 7/8 and 9/0 buttons simultaneously
on the RF keypad 1.
The doors will lock, and then unlock, to confirm that the RF keypad has been programmed.
Repeat this step if more than one RF keypad is used.
16.
After all remote entry transmitters have been programmed, turn the ignition to the OFF
position.
The doors will lock, and then unlock, to confirm that the vehicle has exited programming
mode.
B. Programming a Personal Entry Code (if desired)
NOTE:
If you lose your code card, please contact your Ford/Mercury/Lincoln dealership for factory code
retrieval.
NOTE:
Do not set a personal code that uses five of the same number.
Do not set a personal code that uses five numbers in sequential order.
There is a maximum of two access codes; the factory set code and one personal code.
If you reprogram the personal code the prior personal code will be erased
.
NOTE:
Do not repeat section A if a mistake is made in section B
17. Enter the factory set code, as indicated on your Code Card
18. Within five seconds of entering the factory code, press and hold the 1/2 button for 1 second, the
9/0 button will flash twice to confirm the keypad is in programming mode.
19. Within five seconds, enter your desired personal 5-digit code. Each digit must be entered within
five seconds of the previous digit
Page 2 of 4
SK7L2J - 19G544 – AA
© Ford 2007 FoMoCo
