2. Switch off the engine and wait 10
minutes for the oil to drain into the oil
pan.
3. Remove the dipstick and wipe it with
a clean, lint free cloth. Replace the
dipstick and remove it again to check
the oil level.
If the oil level is at the minimum mark, add
oil immediately. See
Note:
Check the oil level before starting the
engine.
Note:
Make sure that the oil level is
between the minimum and the maximum
marks.
Note:
Do not use oil additives or other
engine treatments. Under certain conditions,
they may damage the engine.
Note:
The oil consumption of new engines
reaches its normal level after approximately
3,107 mi (5,000 km).
Adding Oil
WARNING:
Only add oil when the
engine is cold. If the engine is hot, wait
10 minutes for the engine to cool down.
Failure to take care may result in
personal injury.
WARNING:
Do not remove the
filler cap when the engine is running.
Failure to take care may result in
personal injury.
1.
Remove the filler cap.
2. Add oil that meets Ford specifications.
3. Replace the filler cap. Turn it until you
feel a strong resistance.
Note:
Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
Note:
Soak up any spillage with an
absorbent cloth immediately.
OIL CHANGE INDICATOR
RESET
Use the information display controls on
the steering wheel to reset the oil change
indicator.
From the main menu scroll to:
Action and description
Message
Press the right arrow button,
then from this menu scroll
to the following message.
Settings
Press the right arrow button,
then from this menu scroll
to the following message.
Vehicle
Press the right arrow button,
then from this menu scroll
to the following message.
Oil Life
Press and hold the
OK
button until the instrument
cluster displays the
following message.
Hold OK to
Reset
Reset Successful
When the oil change indic-
ator resets the instrument
cluster displays 100%.
Remaining Life
{00}%
248
Ranger (TFG) Canada/United States of America, enUSA, Edition date: 201809, First-Printing
Maintenance