50
th
Anniversary
Ford Mustang Cobra Jet
Official Owners Manual
Techline 1-800-367-3788
Page 16
5.3 Center Control Panel
Multiple switches are located throughout the control panel for control of starter motor,
ignition, fuel pump, intercooler pump, and launch control RPM. The light above each
switch will illuminate when the switch is placed in the ON position.
1.
Start Switch – Depressing the Start switch will engage the starter for fixed interval
of time. The shifter must be in park or neutral to allow a start attempt or the starter
will be prevented from engaging.
2.
Ignition Switch – The ignition switch is the master start/run control. It must be on
before any vehicle run operation will be allowed.
3.
Fuel Pump Switch – Engage the fuel pump switch to allow the engine to start. The
high flow pump will produce a noticeable tone from the rear of the vehicle, and is
part of normal operation.
4.
Intercooler Pump Switch – Engage the intercooler pump prior to starting the
vehicle to cool the intake air. You may also engage the intercooler pump to pre-
cool the intake heat exchanger between runs with the engine off.
5.
RacePak 1 and 2 – Buttons used to navigate through the different screens on the
display. They may also be used to program and customize each display screen by
NOTE!
None of the electrical systems will function unless the master power switch
is turned on. See Section 2.2 for more information.
