manualshive.com logo in svg

Ford KUGA, Owner'S Manual

Share
Download
Ford KUGA Owner'S Manual Download Page 46

Service position

E85833

E99280

A

1.

Turn on the ignition.

2. Move the wiper lever to position 

A

 and

turn the ignition off as soon as the
wiper blades have reached the service
position.

Changing the windscreen wiper blades

Set the windscreen wipers in the service
position and lift the wiper arms.

E72899

1

2

1.

Press the locking button.

2. Remove the wiper blade.

Note:

Make sure that the wiper blade locks

into place.

3. Install in the reverse order.

Rear window wiper blade

1.

Lift the wiper arm.

2

3

4

E86456

2. Position the wiper blade at right angles

to the wiper arm.

3. Disengage the wiper blade from the

wiper arm.

4. Remove the wiper blade.

Note:

Make sure that the wiper blade locks

into place.

5. Install in the reverse order.

44

Wipers and Washers

Summary of Contents for KUGA

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands