FX1-94
EN
Copyright © 2015
P a g e
|
7
www.Ford-tools.com
7.5
Attaching the dust collector (micro-filter system)
Slide dust collection box into the dust
extraction port
Make sure the latches on the right and left
are into place before beginning the
operation.
There are release buttons on the sides of
the rear cover. Using your fingers, press
the release button in and pull the rear cover
off.
8
TECHNICAL DATA
Model
FX1-94
Nominal voltage
230-240V~ 50Hz
Power consumption
450W
Sanding plate
125mm
No load speed
0-13000min-1
Weight
2.06kg
Safety class
II
9
SOUND EMISSIONS
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
97 dB(A)
Acoustic power level LwA
98 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
aw (Vibration)
Max 10.5 m/s²
K = 1.5 m/s²
10
CLEANING AND MAINTENANCE
Attention !
- Before performing any work on the equipment, pull
the power plug.
10.1
Cleaning
x
Keep the ventilation slots of the machine clean to prevent overheating of
the engine.
x
Regularly clean the machine housing with a soft cloth, preferably after
each use.
x
Keep the ventilation slots free from dust and dirt.
x
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
