FX1-71
EN
Copyright © 2015
P a g e
|
9
www.Ford-tools.com
10
CLEANING AND MAINTENANCE
Attention !
- Before performing any work on the equipment, pull
the power plug.
10.1
Cleaning
x
Keep the ventilation slots of the machine clean to prevent overheating of
the engine.
x
Regularly clean the machine housing with a soft cloth, preferably after
each use.
x
Keep the ventilation slots free from dust and dirt.
x
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
10.2
Lubrication
From time to time, apply a drop of oil to the thread of the lock screw (18).
11
TECHNICAL DATA
Model
FX1-71
Voltage / frequency
230-240V~ 50 Hz
Power input
1800 W
No load speed
Saw blade
Ø 210 x Ø 30 x 2.4 mm
Max. depth of cut 90°
70 mm
Max. depth of cut 45°
Mitre angle
0
–
45°
12
SOUND EMISSIONS
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level L
pA
100 dB(A)
Acoustic power level L
w
A
107 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
a
w
(Vibration)
3.9 m/s²
K = 1.5 m/s²
45 mm
5000 min
-1
