FX1-50-14.4V-1500MAH-2B
EN
Copyright © 2015
P a g e
|
12
www.Ford-tools.com
but will provide less power and torque. Use low speed for high power and torque
application and high speed for fast drilling applications
Important
: NEVER adjust this two speed selector
（
3
）
while the drill is running.
Always let it come to a complete stop.
7.11
LED light
Fig. 8
The LED work-light
（
11
）
can be lit
prior to motor running.
Press the on/off switch lightly, to
keep the work area lighted.
it also lights during operation.
WARNING
:
Do not stare directly at the light
beam. Never aim the beam at any
person or an object other than the
work piece.
Do not deliberately aim the beam
at persons and ensure that it is not
directed towards the eye of a
person for longer than 0.25s.
7.12
Belt clip
Fig. 9
This cordless drill has a belt clip (8) which convenient for carrying on the
operator's belt (see
Fig. 9
). The belt clip can be installed on the both sides of
bottom of cordless drill. Place the belt clip onto the groove and put the screw (b)
