Adjust the guard to protect your hands and direct grinding debris. Loosen the screw.
EN
Copyright © 2015
P a g e
|
6
www.Ford-tools.com
Ensure that ventilation openings are kept clear when working in dusty
conditions. If it should become necessary to clear dust, first disconnect the
tool from the mains supply (use non metallic objects) and avoid damaging
internal parts.
Though poor conditions of the electrical mains, shortly voltage drops can
appear when starting the equipment. This can influence other equipment (eq.
blinking of a lamp). If the mains-impedance Zmax <0.348 Ohm, such
disturbances are not expected. (In case of need, you may contact your local
supply authority for further information.
7
OPERATION
7.1
Fitting the auxiliary handle
Ensure that the plug is not in the socket when fitting or
removing the auxiliary handle.
Fig. 1
The auxiliary handle (6) can be attached to the angle grinder in 2 different
positions: left and right.
7.2
Assembly the protective guard
Fig .2
Position the guard at the required angle. Then tighten the screw.
CAUTION: Be sure that the guard is secure before starting the angle grinder.
Never use the angle grinder without the disc guard in place.
FX1-1070
