Ford FX1-100, Instruction Manual, Page: 10 / 12

FX1-100
EN
Copyright © 2015
P a g e | 9
www.Ford-tools.com
9 CLEANING AND MAINTENANCE
Attention ! - Before performing any work on the equipment, pull
the power plug.
9.1 Cleaning
x Keep the ventilation slots of the machine clean to prevent overheating of
the engine.
x Regularly clean the machine housing with a soft cloth, preferably after
each use.
x Keep the ventilation slots free from dust and dirt.
x If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
9.2 Lubrication
Your power tool requires no additional lubrication
10 TECHNICAL DATA
Model FX1-100
Nominal voltage 230V-50Hz
Power consumption 2000W
Air temperature 30°-600°C
Air stream 350-550 l/min
11 WARRANTY
ƒ
This product is warranted as provided by law for a 24 -month period effective
from the date of purchase by the first user.
ƒ
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings,
brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades,
etc. ; damage or defects resulting from maltreatment, accidents or alterations;
nor the cost of transportation.
ƒ
Damage and/or defects resulting from inappropriate use also do not fall under
the warranty provisions.
ƒ
We also disclaim all liability for any bodily injury resulting from inappropriate
use of the tool.
ƒ
Repairs may only be carried out by an authorised customer service centre for
FORD tools.
ƒ
You can always obtain more information at the number Customer phone
351 234 604 097
ƒ
Any transportation costs shall always be borne by the customer, unless agreed
otherwise in writing.
ƒ
At the same time, no claim can be made on the warranty if the damage of the
device is the result of negligent maintenance or overload.