Intelligent Access Transmitter
*
NOTE
Your transmitter must be within 3 feet (1 meter) of the
vehicle for intelligent access to function properly.
This system operates the power locks.
To unlock a door, pull the exterior door handle. Make sure not to
touch the lock sensor on top of the handle.
To unlock and open the luggage compartment, press the exterior
release button hidden above the license plate.
To lock the doors, touch the lock sensor on top of the door handle.
The transmitter also contains a mechanical key blade to unlock the
driver’s door, if necessary.
NOTE
You must have a valid transmitter inside the vehicle to
switch the power on and start the vehicle.
Remote Start
*
Remote start allows you to start the vehicle from outside using
your remote transmitter.
To start, press
and then press
twice within three seconds.
Once inside, apply the brake while pressing the
START STOP
button. Shift into drive (D) and go.
If you have the integrated keyhead transmitter, insert the key into
the ignition and switch on the ignition as you normally would before
driving. To switch off the vehicle from outside after using your
remote start, press
once.
Memory Function
*
Use the memory controls located on the driver’s door to program
and then recall memory positions. Move the seats and mirrors to the
desired positions. To program up to 3 positions, press and hold the
desired pre-set button until you hear a single tone. You can now use
these controls to recall the set positions.
You can also program your memory seats to your transmitter. That
way, when you unlock your door with the transmitter, your memory
features automatically move into your saved position. See the
Seats
chapter in your
Owner’s Manual
for more details.
*
if equipped
15
1852858_16a_Fusion_Energi_QRG_020415.indd 15
2/4/15 3:08 PM
