E159696
7.
Remove the two outmost front bumper
cover lower fasteners, only on the side
of the headlamp you are servicing, by
turning them counterclockwise.
E159697
8. Separate the front bumper cover from
the fender by gently pulling the front
bumper cover to the outside of the
vehicle 1.2 inches (3 centimeters).
E159698
9. From the front of the vehicle, gently
pull the front bumper cover forward 4
inches (10 centimeters) by grasping it
next to the headlamp to be serviced
and in the lower front of the wheel
opening.
E159699
10.
Gently pull the headlamp assembly
outward to disengage it from the
lower fixing point.
11.
Carefully lift the headlamp and
remove it from the vehicle.
12.
Disconnect the electrical connector
from the headlamp assembly by
pushing the release tab on the
connector.
CHANGING A BULB
WARNINGS
Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart
(page ?).
Install in the reverse order unless otherwise
stated.
268
Fusion Energi / Fusion Hybrid (CC7), enUSA
Maintenance
Summary of Contents for FUSION ENERGI 2015
