Introduction:
Introduction:
Introduction:
Introduction:
Ford CAN-BUS Radio owners will be pleased to find they can now stream
music without changing the look and feel of the dashboard components.
The FRD04-AUX connects to the 16-pin Media port on the radio which
guarantees the best quality playback from any audio device with a 3.5mm
jack including MP3, Smartphone, Tablet, Kindle, iPod etc. Keep the radio
Keep the radio
Keep the radio
Keep the radio
and car you love
and car you love
and car you love
and car you love while enjoying your audio device while on the road. The
FRD04-AUX replaces Satellite Radio and/or RSE (if equipped). For more
For more
For more
For more
see Frequent Asked question
see Frequent Asked question
see Frequent Asked question
see Frequent Asked question at the end of this guide.
Installation:
Installation:
Installation:
Installation:
Remove radio from dashboard to gain access to the connectors.
(Vehicle specific radio removal instructions are not part of this guide,
but available upon request)
1.
With radio out, disconnect factory16-pin plug (See Fig. 3
Fig. 3
Fig. 3
Fig. 3) if
present from the Radio (See Fig. 1
Fig. 1
Fig. 1
Fig. 1)
Fig.
Fig.
Fig.
Fig. 1
11
1
Ford Radio connectors
2.
Plug 16-pin plug removed from radio to 16-pin connector on
adapter harness (See Fig.
Fig.
Fig.
Fig. 2
22
2).
Fig.
Fig.
Fig.
Fig. 2
22
2
16-pin connector on harness
3.
Connect 16-pin plug (See Fig. 3
Fig. 3
Fig. 3
Fig. 3) on Adapter harness the 16-way
connector on Radio vacated in step 1
Fig.
Fig.
Fig.
Fig. 3
33
3
16-pin plug on harness
4.
Tap Purple/black wire from adapter to Purple/black* (PIN 2 or
ACC) on factory 24-pin plug (See Fig. 4
Fig. 4
Fig. 4
Fig. 4)
5.
Connect Green/Black ring terminal to radio chassis or remove ring
terminal and tap into BLACK/VIOLET (PIN 13 or Ground) of
factory 24-pin plug (See Fig. 4
Fig. 4
Fig. 4
Fig. 4)
****Note:
Note:
Note:
Note: Ford wire colors may vary, however pin locations for Accessory
power (pin 2) and Ground (pin 13) remain is standard