Ford Ford Fiesta 2010, Owner'S Manual

Page: 129 / 192

E102881
A
B
C
D
E
F
G
H
I
Label A
Sealant bottle B
Sealant bottle hose C
Bottle holder D
Pressure gauge E
Power plug with cable F
Compressor switch G
Repair kit hose H
Pressure relief valve I
1. Remove the tyre repair kit from the
wrapping.
2. Peel off the label A showing the
maximum permissible speed of
80 km/h (50 mph) from the sealant
bottle and attach it to the instrument
panel in the driver’s field of view. Make
sure the label does not obscure
anything important.
3. Take the hose H with the pressure
relieve valve I and the power plug with
cable F out of the kit.
4. Connect the hose H with the pressure
relieve valve I to the sealant bottle B .
5. Engage the sealant bottle B into the
bottle holder D .
6. Remove the valve cap from the
damaged tyre.
7. Screw the sealant bottle hose C firmly
onto the valve of the damaged tyre.
8. Make sure that the compressor switch
G is in position 0 .
9. Insert the power plug F into the cigar
lighter socket or auxiliary power
socket. See
Cigar lighter (page 76).
10. Start the engine.
11. Move the compressor switch G to
position 1 .
12. Inflate the tyre for no longer than 10
minutes to an inflation pressure of
minimum 1.8 bar (26 psi) and a
maximum of 3.5 bar (51 psi). Move
the compressor switch
G to position
0 and check the current tyre
pressure with pressure gauge E .
Note: If a tyre pressure of 1.8 bar (26 psi)
is not reached do not continue.
Note: When pumping in the sealant
through the tyre valve, the pressure may
rise up to 6 bar (87 psi) but will drop again
after about 30 seconds.
13. Remove the power plug F from the
cigar lighter socket or auxiliary power
socket.
127
(G1083368)
Wheels and tyres