Ford FIESTA 2017, Owner'S Manual

Page: 130 / 224

ENGINE OIL DIPSTICK - 1.0L
ECOBOOST™
E141337
A B
Minimum A
Maximum B
ENGINE OIL DIPSTICK - 1.5L
TIVCT
E95540
B A
Minimum A
Maximum B
ENGINE OIL CHECK
1. Make sure that your vehicle is on level
ground.
2. Switch off the engine and wait 10
minutes for the oil to drain into the oil
pan.
3. Remove the dipstick and wipe it with
a clean, lint free cloth. Replace the
dipstick and remove it again to check
the oil level.
If the oil level is at the minimum mark, add
oil immediately. See
Technical
Specifications (page 140).
Note: Check the oil level before starting the
engine.
Note: Make sure that the oil level is
between the minimum and the maximum
marks.
Note: Do not use oil additives or other
engine treatments. Under certain conditions,
they may damage the engine.
Note: The oil consumption of new engines
reaches its normal level after approximately
5,000 km.
Adding Oil
WARNINGS
Only add oil when the engine is cold.
If the engine is hot, wait 10 minutes
for the engine to cool down. Failure
to take care may result in personal injury.
Do not remove the filler cap when
the engine is running. Failure to take
care may result in personal injury.
1. Remove the filler cap.
2. Add oil that meets Ford specifications.
See Technical Specifications (page
140).
3. Replace the filler cap. Turn it until you
feel a strong resistance.
Note: Do not add oil further than the
maximum mark. Oil levels above the
maximum mark may cause engine damage.
Note: Soak up any spillage with an
absorbent cloth immediately.
ENGINE COOLING FAN
WARNING
Keep your hands and clothing clear
of the engine cooling fan.
126
Fiesta (CC3) Indonesia/Philippines/Taiwan/Thailand/Vietnam, Vehicles Built From: 07-03-2016, CG3692en enPHI, Edition date: 201511, Second Printing
Maintenance