Ford FE1-70, Instruction Manual

Page: 9 / 12

FE1-70
EN
Copyright © 2015
P a g e | 8
www.Ford-tools.com
8.2 Switching on and off
ƒ
To switch the tool on, keep the lock-off button
(12) depressed and press the on/off switch
(11).
ƒ
To switch the tool off, release the on/off
switch.
8.3 Dust extraction
A vacuum cleaner can be connected to the dust extraction connector, either
directly to the connector or using an adapter.
ƒ
If necessary, connect an adapter to the connector (1).
ƒ
Preferably use a vacuum cleaner for industrial use.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull
the power plug.
9.1 Cleaning
ƒ
Keep the ventilation slots of the machine clean to prevent overheating of the
engine.
ƒ
Regularly clean the machine housing with a soft cloth, preferably after each
use.
ƒ
Keep the ventilation slots free from dust and dirt.
ƒ
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc.
These solvents may damage the plastic parts.
9.2 Checking and replacing the carbon brushes
The carbon brushes must be checked on a regular basis.
ƒ
In case of wear, replace both carbon brushes at the same time.
ƒ
After mounting new carbon brushes, let the machine run at no load for 15
minutes.
Use only the correct type of carbon brushes.
9.3 Lubrication
From time to time, apply a drop of oil to the thread of the lock screw .