Ford FE1-30, Instruction Manual, Page: 10 / 12

FE1-30
EN
Copyright © 2015
P a g e | 7
www.Ford-tools.com
7.4 Sawing tips
Cutting veneered chipboard:
Use a fine saw blade
Position the base on the uncovered area
Advance the saw with little force.
A: support
Cutting holes : Possible only in chipboard and
wood unless you drill a hole first. Press the
jig saw firmly against the support and move
slowly in cutting direction.
7.5 Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum
cleaner to the socket at the rear of the jigsaw. If you require a special adapter,
please contact the manufacturer of your vacuum cleaner.
8 TECHNICAL DATA
Model FE1-30
Nominal voltage 230V-50Hz
Power consumption 450 W
Cutting rate 2800 min-1
Cutting depth in wood 60 mm
Cutting depth in plastic 12 mm
Cutting depth in steel 8 mm
Mitre cuts Up to 45° (left and right)
9 SOUND EMISSIONS
Noise values measured according to relevant standard. (K = 3)
Acoustic pressure level LpA
81 dB(A)
Acoustic power level LwA 92 dB(A)
ATTENTION! The sound power level may exceed 85 dB(A), in
this case individual hearing protection shall be worn.
aw (Vibration) 6.4 m/s² K = 1.5 m/s²
10 WARRANTY
ƒ
This product is warranted as provided by law for a 24 -month period effective
from the date of purchase by the first user.
ƒ
This warranty covers all material or production flaws excluding: batteries,
chargers, defective parts subject to normal wear & tear such as bearings,
brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades,
etc. ; damage or defects resulting from maltreatment, accidents or alterations;
nor the cost of transportation.
ƒ
Damage and/or defects resulting from inappropriate use also do not fall under
the warranty provisions.