Revised September 13, 2013
Real-Time Speed Adjust:
1)
Tap the pushbutton until the tachometer points to 4000 RPM
(real-time speed adjust option).
Fig. 9
2)
Press and hold (
4 seconds
) the pushbutton to enter the real-
time speed adjust mode.
3)
Begin driving the vehicle at a steady known speed (using a
GPS or pacing another vehicle). The tachometer will remain
at 4000 RPM to indicate the gauge is in real-time speed
adjust mode.
4)
Pressing the pushbutton will begin to increase the speed
reading until the button is released.
5)
The next time the pushbutton is pressed the speed reading
will decrease until the button is released.
6)
Continue adjusting the speedometer reading until the correct
speed is achieved.
7)
If no adjustments are made for 8 seconds, the current
calibration setting will be saved. The speed setting may still
be adjusted after this until the key is turned off and will be
saved again after 8 seconds of pushbutton inactivity. When
finished adjusting the speed, bring the vehicle to a stop and
turn the key off to exit the setup mode.
Happy Hot Rodding!
