Maintenance Operation
Frequency - Observation
Check the battery terminals for
corrosion
Whenever electrical power supply has
diminished.
Tighten the wheel mounting
nuts to the specified torque.
Refer to
Wheels
in the
Maintenance and
Specifications
chapter
Required initially at 500 and 1000
miles (800 and 1600 km). Perform
again at 500 and 1000 mile (800 and
1600 km) intervals after each tire
removal/replacement.
Clean body/door drain holes
At least twice annually.
Clean windshield wiper blades
As required.
Replace windshield wiper
blades
If wiping the blades with a clean cloth
and mild detergent and washing with
a cleaner does not restore a clean
wipe.
Lubricate body lock cylinders
Noisy or difficult to operate.
Check headlamp alignment
Lamp beams in wrong position when
vehicle operating loaded.
Check windshield washer fluid
level; add fluid if required
If washes do not spray when operated.
1
- During maintenance and repair, protect the fuel tube and the hose
assemblies, the power steering lines, and the brake lines from the
external heat, the acids and the abrasion that could damage the lines.
2
- Check for (free) linkage action and ensure that (return) spring
force is adequate to maintain pedal free play.
3
- Adjust, repair or replace as required with the same or equivalent
parts.
2008 F-650/750
(f67)
Supplement
USA
(fus)
Scheduled Maintenance Guide
239
