Volume/Power Control
– Press the
control to turn the audio system on or
off. Turn the control to raise or lower
volume. If the volume is set above a
certain level and the ignition is turned
off, the volume will come back on at a
"nominal" listening level when the
ignition switch is turned back on.
AM/FM Select
– In radio mode, press
to select AM, FM1, or FM2 band. In
tape or CD mode, press to stop play
and begin radio play.
Seek Function
– In radio mode, press to
find the next listenable station up or
down the band. In tape mode, press to
move to the next/previous selection on
the tape. In CD mode, press to select
the next/previous track of the disc.
Scan Function
– In radio mode, press
to hear a sampling of all listenable
stations. In tape or CD mode, press
to hear a brief sampling of all
selections. Press the control again
to stop the scan function.
Tune Adjust
– In radio mode, press to
move to the next frequency up or
down the band.
Tape/CD Select
– To begin tape play
while in radio or CD mode, press the
tape control. To begin CD play, press
the CD control. Press the CD control
again to toggle between single CD
and CD changer play (if equipped).
Autoset Memory Preset
– Select AM,
FM1, or FM2 bands, then press AUTO to
activate autoset memory preset, which
allows you to set strong radio stations
without losing your original manually
set preset stations. Press again to
deactivate autoset.
Setting the Clock
– Press the CLK
control to toggle between station
mode and clock mode. Press and hold
to set the clock. Press the SEEK to
decrease hours or SEEK to increase
hours. Press the TUNE to decrease
minutes or TUNE to increase minutes.
Select
– Press to adjust sound output
and distribution after selecting BASS,
TREB, BAL, FADE, or other menu
selections.
Setting Memory Preset Stations
–
Select AM, FM1, or FM2 band, then
select a station. Next, press and
hold a numbered control until the
sound returns.
A
B
E
D
C
F
G
I
A
B
E
D
C
F
G
J
I
H
J
H
(if equipped)
