Black plate (230,1)
Engine oil viscosity, or thickness, has an effect on fuel economy and cold-weather
operation (starting and oil flow).
Low-viscosity engine oils can provide improved fuel economy and cold-weather
performance.
But high-temperature weather conditions require higher-viscosity engine oils for
satisfactory lubrication.
When choosing an oil, consider the temperature range your vehicle will operate in before
the next oil change.
Then select the recommended viscosity from this chart above.
CAUTION
Using oils of viscosity besides those recommended for specific temperature ranges could
result in engine damage.
NOTE
(Petrol engine)
It is normal for all engines to consume engine oil under normal driving conditions.
This is caused by evaporation, internal ventilation and burning of the lubricating oil in
the working engine. Engine oil consumption can be as high as 0.8L/1000 km (1L/800
miles). Oil consumption tends to be higher when the engine is new because of the
lapping process. It also depends on engine speed and engine load. Under extreme driving
conditions, oil consumption can be higher.
q
Inspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the sump.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
F
L
Petrol engine
Full
Low
OK
8-16
Maintenance and Care
Owner Maintenance
EVEREST_F8M7-10-09B_Edition1 Page230
Tuesday, February 10 2009 12:55 AM
Form No.F8M7-10-09B
