12
13
*
if equipped
Ambient Lighting
*
To access and adjust:
1. Press the
Settings
icon then
Ambient Lighting
.
2. Touch the desired color.
3. Use the scroll bar to increase or decrease
the intensity.
To switch ambient lighting off, press the
active color once or drag the active color all
the way down to zero intensity.
Rear Seats
With the seat occupied, pull the lever up to
recline the seatback to the desired position.
With the seat unoccupied, pull the lever up
to fold the seatback forward. You may need
to fold the outboard head restraints and
lower the center head restraint first.
Dual Automatic
Temperature Control
You and your front passenger can adjust
independent controls to set the air
temperature on each side of the vehicle.
To return to one temperature, press and
hold the AUTO button for more than two
seconds. The passenger setting then
switches to the driver set temperature.
Heated Front Seats
*
The front heated seat controls are on the
center stack. Adjust the control to your
desired heat setting.
Remote Start
*
Remote start allows you to start the engine
from outside your vehicle using your key.
To start, press and then press
twice
within three seconds. Before driving your
vehicle, you must press the push button
ignition switch on the instrument panel
while applying the brake pedal. You can also
turn your vehicle off from outside after a
remote start by pressing
once.
Moonroof and Sunscreen
*
The moonroof controls are on the overhead console and have
a one-touch open and close feature. To stop its movement
during one-touch operation, press the control a second time.
Press and release the rear of the control to open the
moonroof. The moonroof stops short of the fully opened
position. To open the moonroof fully, press and release the
control again. Press and release the front of the control to
close the moonroof. The sunscreen automatically opens
with the moonroof.
Press and release the rear of the control to open the
sunscreen. Press and release the front of the control to
close the sunscreen.
Memory Function
*
The memory function allows a one-touch
recall of personalized memory features
including the driver seat and power mirrors.
Use the memory controls on the driver
door to program and then recall memory
positions. To program a position, switch
the ignition on. Adjust the memory features to your desired
positions. Press and hold the desired preset button until you
hear a single tone. You can now use these controls to recall the
set memory positions. You can also program your memory seat
to your transmitter. That way, when you unlock your door with
the transmitter, your memory features automatically move into
your saved positions.
See the
Seats
chapter in your
Owner’s Manual
for more details.
Tilting Front-Row
Head Restraints
Tilt the head restraint forward for
additional comfort by gently pulling
the top of the head restraint. Once it
is in the forward-most position,
tilting it forward again releases it
to the upright position.
Comfort
*
if equipped
