6. Remove the lug wrench from the tool
bag. Turn the spare tire fasteners
counterclockwise starting with the
lowest first, and remove the spare tire
from the rear of the vehicle.
Note:
The wheel lock key must be inserted
into the wheel lock nut before the lug
wrench can turn the locking nut.
E328591
Note:
Do not lay the wheel's face down on
the ground, as there is a risk of scratching
or marring the wheel if laid down on an
uneven surface.
7.
Loosen each road wheel nut a half a
turn counterclockwise, do not remove
them until the flat tire is raised off the
ground.
E328732
1
2
8. When you are changing a flat front tire,
connect the extension block to the jack
loadrest using the wing bolt as shown.
Connect the jack handle to the jack,
and use the lug nut wrench to operate
the jack.
E330077
9. Do not use the extension block when
you are changing a flat tire on the rear
of the vehicle. Assemble the jack
handle using the extensions as shown
to operate the jack when placing under
the rear axle.
92
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Changing a Road Wheel
