Performance gauge
- performs the following functions:
•
Real time mode – measures G
force/acceleration (
Note:
Requires initial calibration) See
Setup information.
•
1/4 mile data including reaction
time
•
0-60 mph times
•
60-0 mph distances
•
Horsepower -
Note:
This reading
will vary from advertised engine horsepower. It includes losses
through the drivetrain and other factors such as fuel octane, wind,
weight, road grade, etc.
•
Setup
This gauge is intended for off-road use only (racetracks or other
controlled courses or settings).
Real time mode:
The performance gauge calculates/displays acceleration and G-forces
while in real time mode. The customer is required to calibrate/initialize
the performance gauge to ensure proper acceleration measurements
while in real time mode (see Setup section). At vehicle start up, the
performance gauge defaults to real time mode. The gauge stays in real
time mode until the user selects one of the other five operating modes.
The gauge returns to real time mode after exiting the operating modes.
In real time mode, the gauge will display the driver’s choice of
acceleration/deceleration or lateral g-forces on an LED graph and display.
Acceleration forces will be displayed on the bar graph to the right of
center. Deceleration forces will be displayed on the bar graph to the left
of center.
•
Press B to change the display to the lateral axis.
•
See bar graph forward/lateral high/low under Setup to change the
range of g-forces capable of being displayed on the LED.
Peak Recall – While in any mode, the gauge will record the highest
g-force values for all four axes (accel, decel, left and right).
•
Press C to view these values.
•
Press A to move to the next value.
•
Press B to clear the value.
Boss
T
302 Unique Features
10
