Ford B-MAX 2014 Quick Reference Manual Download Page 7

AUTOWIPERS

Maximum autowipe.

A

On.

B

Minimum autowipe.

C

The wipers will operate when the rain
sensor detects water on the windshield.
The rain sensor will continue to monitor the
amount of water on the windshield and
automatically adjust the speed of the
wipers.  Use the rotary control to adjust the
sensitivity of the autowipers.

Note:

 If streaks or smears appear on the

windshield, clean the windshield and the
wiper blades.  If that does not resolve the
issue, install new wiper blades.

POWER WINDOWS

To reduce wind noise or buffeting when just
one window is open, open the opposite
window slightly.

GLOBAL OPENING AND
CLOSING

Vehicles Without Keyless Entry

Global Opening

To open all the windows:

1.

Press and release the remote control
unlock button.

2. Press and hold the remote control

unlock button for at least three seconds.

Global Closing

To close all the windows, press
and hold the remote control lock
button for at least three seconds.

Vehicles With Keyless Entry

Global Opening and Closing

To open or close all the windows, press and
hold the driver door handle for at least three
seconds.

CLOCK

Type 1

To adjust the clock, switch the ignition on
and press buttons H or M on the information
and entertainment display as necessary.

Type 2

Note:

Use the information display to adjust

the clock.

5

B-MAX (CB2) Vehicles Built From: 17-11-2014, CG3574en enGBR, Edition date: 09/2014, First Printing

Summary of Contents for B-MAX 2014



















Reviews: