Ford Aviator 2005 Page 77 Owner'S Manual Download

Page: 77 / 376

Deleting areas to avoid

To delete a selection from the
“Avoid area” list:

•

From the stored locations menu,
select “Avoid area”.

•

Press DELETE

•

Select the desired area to be
deleted.

•

Press DEL. ALL to delete all
stored areas.

•

Press YES to confirm.

Destination menu

Press DEST on the main bezel to access the navigation mode.

2005 Aviator

(231)

Owners Guide (post-2002-fmt)
USA

(fus)

Entertainment Systems

Summary of Contents for Aviator 2005

























































































































































































































































































































































































Search results

Summary of Contents for Aviator 2005

Reviews:

Related manuals for Aviator 2005

Brands by name

Popular brands

Ford Aviator 2005, Owner'S Manual

Search results

Summary of Contents for Aviator 2005

Reviews:

Related manuals for Aviator 2005

Brands by name

Popular brands