Each time you start the vehicle, the system
selects the last chosen gap for the current
driver.
Disengaging the System
Press the brake pedal or press
CNCL
. The
last set speed displays in grey but will not
erase.
Overriding the System
WARNING
Whenever the driver is overriding the
system by pressing the accelerator
pedal, the system will not
automatically apply the brakes to maintain
separation from any vehicle ahead.
You can override the set speed and gap
distance by pressing the accelerator pedal.
E144529
When you override the system,
the indicator light changes color
and a vehicle graphic does not
show in the information display.
The system will resume operation when
you release the accelerator pedal. The
vehicle speed will decrease to the set
speed, or a lower speed if following a
slower vehicle.
Changing the Set Speed
•
Press the accelerator or brake pedal
until you reach the desired speed. Press
and release
SET+
.
•
Press and hold
SET+
or
SET-
until the
desired set speed shows on the
information display. The vehicle speed
will gradually change to the selected
speed.
•
Press and release
SET+
or
SET-
. The
set speed changes in approximately 1
mph (2 km/h) increments.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed displays continuously in the
information display while the system is
active.
Resuming the Set Speed
Note:
Only use resume if you are aware of
the set speed and intend to return to it.
Press and release
RES
. The vehicle returns
to the previously set speed. The set speed
displays continuously in the information
display while the system is active.
Low Speed Automatic
Cancellation
The system is not functional at vehicle
speeds below 12 mph (20 km/h). An
audible alarm sounds and automatic
braking releases if the vehicle drops below
this speed.
Hilly Condition Usage
Note:
An audible alarm sounds and the
system shuts down when it applies brakes
for an extended period of time. This allows
the brakes to cool. The system functions
normally after the brakes have cooled.
You should select a lower gear position
when the system is active in situations
such as prolonged downhill driving on
steep grades, for example in mountainous
areas. The system needs additional engine
braking in these situations to reduce the
load on the vehicle’s regular brake system
to prevent them from overheating.
Switching Adaptive Cruise Control
Off
Note:
The set speed memory erases when
you switch off the system.
Press and release
OFF
or switch off the
ignition.
199
Fusion Energi / Fusion Hybrid (CC7) Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV), Canada/United States of America, enUSA, First Printing
Cruise Control
Summary of Contents for 2016 Fusion Energi
Page 3: ......