E194383
6. Pull the location pin outward and
extend the ramp until the pin is seated
in the usage position, then set the ramp
on even ground.
Stowing the Bed Ramp
1.
Pick up the ramp. Pull the location pin
outward.
2. Slide the ramp into the storage position
until the location pin locks.
Note:
Make sure the proper pin location has
been applied for your bed size.
3. Slide the ramp claw off of the tailgate
plate.
4. Rotate the stops at the underside of
the ramp to the closed position.
E194391
5. Place the ramp into the ramp holder.
6. Install the cam bolts and close the cam
lever arms.
7.
Attach the front and rear cables.
Installing the Ramp Holder
E194387
1.
Hook the top of the ramp holder over
the mounting plate and rotate the
ramp holder into position.
247
F-150 (TFC) Canada/United States of America, enUSA, Fourth Printing
Load Carrying