CREATING A MYKEY
Use the information display to create a
MyKey:
1. Insert the key you want to program into
the ignition. If your vehicle is equipped with
a push-button start, put the intelligent
access key in the backup slot. See
Starting and Stopping the Engine
(page
132).
E147165
2. Switch the ignition on.
3. From the main menu within the
information display, press
OK
or the
>
button to navigate through the various
screens. Select
Settings
, then
MyKey
.
4. Press
OK
to select
Create
.
5. When prompted, hold the
OK
button
until you see a message informing you to
label this key as a MyKey. The key will be
restricted at the next start.
MyKey is successfully created. Make sure
you label it so you can distinguish it from
the admin keys.
Programming/Changing Optional
Settings
Note:
You can clear or change your MyKey
settings at any time during the same key
cycle as you created them with either the
MyKey or an admin key. Once you have
switched the engine off, however, you will
need an admin key to change or clear your
MyKey settings.
Using the information display, access your
optional MyKey settings.
1.
Switch the ignition on using an admin
key or fob.
2. Access the main menu and select
Settings
, then
MyKey
.
3. Use the arrow buttons to get to an
optional feature.
4. Press
OK
or
>
to scroll through
settings.
5. Press
OK
or
>
to make a selection.
CLEARING ALL MYKEYS
You can clear all MyKeys within the same
key cycle as you created the MyKey. If you
switch your ignition off, however, you will
need to use an admin key to clear your
MyKeys.
Note:
When you clear your MyKeys, you
remove all restrictions and return all MyKeys
to their original admin key status at once.
To clear all MyKeys of all MyKey settings,
use the information display to do the
following:
1.
Access the main menu and select
Settings
, then
MyKey
.
2. Scroll to
Clear All
and press the
OK
button.
3. Hold the
OK
button until
ALL
MYKEYS CLEARED
displays.
49
MyKey™
