•
Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Once
you select a speed, it will be shown in the display, followed by an
audible tone when the preselected vehicle speed is exceeded.
•
Audio system maximum volume of 45%. A message will be shown in
the display when you attempt to exceed the limited volume. Also, the
speed-sensitive or compensated automatic volume control will be
disabled.
•
Always on setting. When this is selected, you will not be able to turn
off Advance Trac, 911 Assist or the do not disturb feature (if your
vehicle is equipped with these features).
CREATING A MYKEY
Use the information display to create a MyKey.
For Type 1 information displays:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. Access the main menu within the information display, and press
SETUP
using the information display button until
PRESS RESET
TO CREATE MYKEY
displays.
4. Press and release the
RESET
button. The message
HOLD RESET
TO CONFIRM MYKEY
will display.
5. Press and hold the
RESET
button for two seconds until
MARK
THIS AS RESTRICTED
displays. Wait until
KEY RESTRICTED
AT NEXT START
displays, confirming that your key is successfully
created.
Make sure you label your key so you can distinguish it from the admin
keys.
For Type 2 information display controls:
1. Insert the key you want to program into the ignition.
2. Switch the ignition on.
3. From the main menu within the information display, use the right
arrow key
>
or
OK
to select
SETTING
and then
MYKEY
.
4. Press
>
or
OK
to select
CREATE MYKEY
.
5. Hold
OK
as prompted until you see
MARK THIS KEY AS
RESTRICTED
in the information display screen.
The key is successfully created. Make sure you label it so you can
distinguish it from the admin keys.
You can also program configurable settings for the key(s). Refer to the
Programming/Changing Optional Settings
section .
72
MyKey
2013 F-150
(f12)
Owners Guide gf, 3rd Printing, February 2013
USA
(fus)