Ford 2011 Econoline Owner'S Manual Download Page 102

Page: 102 / 339

Reasons given...

Consider...

“I have an airbag”

Airbags offer greater protection when
used with safety belts. Frontal airbags
are not designed to inflate in rear and
side crashes or rollovers.

“I’d rather be thrown clear”

People

who are

ejected are 40

times more likely to DIE.

Safety

belts help prevent ejection, WE CAN’T
“PICK OUR CRASH”.

WARNING:

Do not sit on top of a buckled safety belt or insert a

latchplate into the buckle to avoid the Belt-Minder

威

chime. To

do so may adversely affect the performance of the vehicle’s air bag
system

One-time disable

Any time the safety belt is buckled and then unbuckled during an
ignition on cycle, the Belt-Minder

威

will be disabled for that ignition cycle

only.

Deactivating/activating the Belt-Minder

姞

feature

Read Steps 1 - 5 thoroughly before proceeding with the
deactivation/activation programming procedure.

The Belt-Minder

威

feature can be deactivated/activated by performing the

following procedure:
Before following the procedure, make sure that:

•

the parking brake is set

•

the gearshift is in P (Park)

•

the ignition switch is in the off position

•

all vehicle doors and the hood are closed

•

the driver’s safety belt is unbuckled

•

the parking lamps/headlamps are in the off position

WARNING:

While the design allows you to deactivate your

Belt-Minder

威

, this system is designed to improve your chances of

being safely belted and surviving an accident. We recommend you
leave the Belt-Minder

威

system activated for yourself and others who

may use the vehicle. To reduce the risk of injury, do not
deactivate/activate the Belt-Minder

威

feature while driving the vehicle.

Seating and Safety Restraints

102

2011 Econoline

(eco)

Owners Guide, 3rd Printing
USA

(fus)

Summary of Contents for 2011 Econoline




















































































































































































































































































































































Search results

Summary of Contents for 2011 Econoline

Reviews:

Related manuals for 2011 Econoline

Brands by name

Popular brands

Ford 2011 Econoline, Owner'S Manual

Search results

Summary of Contents for 2011 Econoline

Reviews:

Related manuals for 2011 Econoline

Brands by name

Popular brands