manualshive.com logo in svg

Ford 2010 Fusion, Owner'S Manual

The Ford 2010 Fusion Owner's Manual is a comprehensive guide that provides you with all the crucial information you need to operate and maintain your vehicle. It is available for download, completely free of charge, from manualshive.com. Ensure a smooth driving experience by accessing this essential manual today.

Share
Download
background image

Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to

Tire pressure monitoring system

(TPMS)

in the

Tires, Wheels and Loading

chapter. Replace the spare

tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.

WARNING:

The use of tire sealants may damage your Tire

Pressure Monitoring System and should not be used.

WARNING:

Refer to

Tire pressure monitoring system (TPMS)

in the

Tires, Wheels and Loading

chapter for important

information. If the tire pressure monitor sensor becomes damaged, it
will no longer function.

Dissimilar spare tire/wheel information

WARNING:

Failure to follow these guidelines could result in an

increased risk of loss of vehicle control, injury or death.

If you have a dissimilar spare tire/wheel, then it is intended for
temporary use only. This means that if you need to use it, you should
replace it as soon as possible with a road tire/wheel that is the same size
and type as the road tires and wheels that were originally provided by
Ford. If the dissimilar spare tire or wheel is damaged, it should be
replaced rather than repaired.

A dissimilar spare tire/wheel is defined as a spare tire and/or wheel that
is different in brand, size or appearance from the road tires and wheels
and can be one of three types:

1.

T-type mini-spare:

This spare tire begins with the letter “T” for tire

size and may have “Temporary Use Only” molded in the sidewall

2.

Full-size dissimilar spare with label on wheel:

This spare tire has

a label on the wheel that states: “THIS TIRE AND WHEEL FOR
TEMPORARY USE ONLY”

Roadside Emergencies

250

2010 Fusion

(fsn)

Owners Guide, 2nd Printing
USA

(fus)

Summary of Contents for 2010 Fusion

























































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Fusion

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Brodit ProClip 804438 Installation Instructions preview
ProClip 804438
Brand: Brodit Pages: 2
XTC ATS-POL-GBU Manual preview
ATS-POL-GBU
Brand: XTC Pages: 4
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
RAM 2012 Truck Chassis cab Owner'S Manual preview
2012 Truck Chassis cab
Brand: RAM Pages: 506
Easee Home Wallbox Installation Instructions Manual preview
Home Wallbox
Brand: Easee Pages: 12
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2
Xblitz XME PRO User Manual preview
XME PRO
Brand: Xblitz Pages: 56
Subaru 1994 Impreza Supplemental Service Manual preview
1994 Impreza
Brand: Subaru Pages: 540
Vauxhall Crossland X 2017 Owner'S Manual preview
Crossland X 2017
Brand: Vauxhall Pages: 245
Scosche HUD580GC Manual preview
HUD580GC
Brand: Scosche Pages: 12
Pogo Alert+ Operating Instructions Manual preview
Alert+
Brand: Pogo Pages: 40
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16
GEMINI TECHNOLOGY 514F User Manual preview
514F
Brand: GEMINI TECHNOLOGY Pages: 9
Jeep 2012 Patriot Series Owner'S Manual preview
2012 Patriot Series
Brand: Jeep Pages: 505

Brands by name

Popular brands

Load more brands