Ford 2010 350 Owner'S Manual Download

Page: 354 / 407

SERVICE RECOMMENDATIONS

To help you service your vehicle, we provide

scheduled maintenance

information

which makes tracking routine service easy.

If your vehicle requires professional service, your authorized dealer can
provide the necessary parts and service. Check your

Warranty

Guide/Customer Information Guide

to find out which parts and

services are covered.

Use only recommended fuels, lubricants, fluids and service parts
conforming to specifications. Motorcraft

威

parts are designed and built to

provide the best performance in your vehicle.

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

•

Do not work on a hot engine.

•

Make sure that nothing gets caught in moving parts.

•

Do not work on a vehicle with the engine running in an enclosed
space, unless you are sure you have enough ventilation.

•

Keep all open flames and other burning material (such as cigarettes)
away from the battery and all fuel related parts.

Working with the engine off

•

Automatic transmission:

1. Set the parking brake and shift to P (Park).

2. Turn off the engine and remove the key.

3. Block the wheels.

•

Manual transmission:

1. Set the parking brake, press and hold the clutch pedal, place the
gearshift in 1 (First), and release the clutch pedal.

2. Turn off the engine and remove the key.

3. Block the wheels.

Working with the engine on

•

Automatic transmission:

1. Set the parking brake and shift to P (Park).

2. Block the wheels.

•

Manual transmission:

1. Set the parking brake, press and hold the clutch pedal, place the
gearshift in N (Neutral), and release the clutch pedal.

Maintenance and Specifications

354

2010 F-250/350/450/550

(f23)

Owners Guide, 1st Printing
USA

(fus)

Summary of Contents for 2010 350
























































































































































































































































































































































































































Search results

Summary of Contents for 2010 350

Reviews:

Related manuals for 2010 350

Brands by name

Popular brands

Ford 2010 350, Owner'S Manual

Search results

Summary of Contents for 2010 350

Reviews:

Related manuals for 2010 350

Brands by name

Popular brands