In case there is a problem with the
front passenger sensing system, the
airbag readiness lamp in the
instrument cluster will stay lit.
If the airbag readiness lamp is lit, do the following:
The driver and/or adult passengers should check for any objects that
may be lodged underneath the front passenger seat or cargo interfering
with the seat.
If objects are lodged and/or cargo is interfering with the seat; please take
the following steps to remove the obstruction:
•
Pull the vehicle over.
•
Turn the vehicle off.
•
Driver and/or adult passengers should check for any objects lodged
underneath the front passenger seat or cargo interfering with the seat.
•
Remove the obstruction(s) (if found).
•
Restart the vehicle.
•
Wait at least two minutes and verify that the airbag readiness lamp is
no longer illuminated
•
If the airbag readiness lamp remains illuminated, this may or may/not
be a problem due to the front passenger sensing system.
DO NOT attempt to repair or service the system; contact your authorized
dealer as soon as possible.
If it is necessary to modify an advanced front airbag system to
accommodate a person with disabilities, contact the Ford Customer
Relationship Center at the phone number shown in the
Customer
Assistance
chapter of this
Owner’s Guide.
WARNING:
Any alteration/modification to the front passenger
seat may affect the performance of the front passenger sensing
system.
Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to
Airbag readiness
section
in the
Instrument Cluster
chapter. Routine maintenance of the airbag is
not required.
2009 Explorer
(exp)
Owners Guide, 1st Printing
USA
(fus)
Seating and Safety Restraints
212
