Ford 2008 Escape, Wiring Diagrams

Page: 17 / 219

14
Electrical System General Procedures
00P
Form No. F1A3-20-06C
ELECTRICAL PARTS
B6U000000006W03
Battery Cable
• Before disconnecting connectors or removing
electrical parts, disconnect the negative battery cable.
Wiring Harness
• To remove the wiring harness from the clip in the
engine room, pry up the hook of the clip using a
flathead screwdriver.
Caution
• Do not remove the Harness protective tape.
Otherwise, the wires could rub against the body,
which could result in water penetration and
electrical shorting.
CONNECTORS
Data Link Connector
• Insert the probe into the terminal when connecting a
jumper wire to the data link connector.
Caution
• Inserting a jumper wire probe into the data link
connector terminal may damage the terminal.
Disconnecting Connectors
• When disconnecting connector, grasp the connectors,
not the wires.
WGIWXX0007E
NEGATIVE BATTERY CABLE
WGIWXX0041E
NO GOOD
WGIWXX0039E
WGIWXX0040E
NO GOOD
X3U000WAY
NO GOOD GOOD
F1A3-20-06C_GI.fm Page 14 Thursday, March 23, 2006 7:46 PM